Config Sync - Devolo Magic 2 WiFi next Manual

net as a file download, for example to modify exi-
sting functions.
Current firmware
The currently installed
devolo Magic 2 WiFi next is displayed here.
Searching for and updating firmware
automatically
The adapter can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The devolo Magic 2 WiFi next lets you know
when a new firmware version becomes
available. The option is enabled by default.
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The devolo Magic 2 WiFi next automatically
updates its firmware. The option is enabled by
default.
Download updated firmware
1
If you have downloaded an updated firm-
ware file for the devolo Magic 2 WiFi next to
your computer, navigate to the System
2
firmware of the

4.7.5 Config Sync

Config Sync allows settings to be configured uni-
formly for all devolo Magic devices in the network.
This includes the following settings e.g.:
b
b
b
b
In order to switch Config Sync on, activate the
Enable option.

Network configuration 48

Firmware Update firmware area. Click
Browse ... and select the downloaded file.
Confirm the update procedure with Update
firmware. After a successful update, the
devolo Magic 2 WiFi next restarts automati-
cally.
Ensure that the update procedure is not
interrupted.
Wi-Fi network
Guest network
Mesh Wi-Fi
Time control and time server settings.
Please note that the Wi-Fi is always switched on
or off for the entire network. Therefore, stop
Config Sync first on a device that you want to
configure or switch separately.
devolo Magic 2 WiFi next