Table of Contents
Advertisement
In most applications, the unit will be mounted through a ceiling tile, with only the lens being visible from inside the room; the remainder
of the unit will rest on top of the tile. The alternate mounting approach permits the unit to be affixed to hard surface. In these surface-
mount applications, an accessory plastic mounting bracket is required. An accessory for mounting the unit to a J-Box is also available.
The device has an adjustable head to accommodate multiple mounting methods and building materials or fixture walls.
5/8" - 1.25" adjustable
for mounting material
Ceiling or fixture wall
NOTE: In surface- or J-Box mounted applications, the shorter-tube LMLS-400 model is recommended.
MOUNTING THE PHOTOSENSOR
Ceiling or fixture mounted
Lens
NOTE: For ceiling thickness lower than 5/8", the LMLS-400 must be used.
Mounting bracket
Cabling
Fig. 4a: Surface Mount using
LMLS-MB2 Mounting Bracket
Fig. 4b: Surface Mount using
LMLS-MB1 J-Box Mounting Bracket
Attach cable
Surface mounted
Ceiling or fixture wall
Remove
tab
Or
J-Box mounted
3
Fig. 3: Mount Sensor to Ceiling
Advertisement
Table of Contents
