Rear Shock Absorber; Rear Brake Pedal; Shift Pedal - Benelli TRK249 Manual

PRIMARY PARTS

REAR SHOCK ABSORBER

The motorcycle is equipped with one rear shock absorber.
Spring pre-load adjustment.
The rear shock absorber is equipped with adjustment ring nuts for preload adjustment.
Adjust the spring preload as follows:
To increase the preload setting of the spring, turn the adjustment ring nut with special
wrench , to make the suspension sti er.
Please rotate opposite direction to achieve a softer setting. After adjustment, please make
sure the lock nut tightened to ensure safety of riding.

REAR BRAKE PEDAL

Step the rear brake pedal to slow down
the rear wheel. Brake light will turn on
while rear brake is in use.

SHIFT PEDAL

This motorcycle is equipped with six-speed
constant mesh gearbox.
BJ250-18
REAR BRAKE PEDAL
SHIFT PEDAL
24
(Preload)