Rear Shock Absorber - Benelli BJ500-6A User Manual

PRIMARY PARTS
Note：
Never ll the tank so the fuel level rises into the ller neck. If the tank is over lled, heat may cause the fuel to expand
and ow into the Evaporative Emission Control System resulting in hard starting, engine hesitation and non-compli-
ance with the emission regulation.

REAR SHOCK ABSORBER

The motorcycle is equipped with one rear shock absorber.
Spring pre-load adjustment.
The rear shock absorber is equipped with adjustment ring nuts for preload
adjustment.
Adjust the spring preload as follows:
To increase the preload setting of the spring, turn the adjustment ring nut
with special wrench , to make the suspension sti er.
Please rotate opposite direction to achieve a softer setting. After adjustment,
please make sure the lock nut tightened to ensure safety of riding.
23
(Preload)
BJ500-6A