Dell EMC VxRail E Series Owner's Manual page 11

access iDRAC. Item 9 is the CMA power port, enables you to connect to cable management arm
LED. Item 10 is the Appliance identification button, helps in identifying the appliance in a rack.
Table 6 10 X 2.5 inch drive appliance with 3 PCIe expansion slot
Item Ports, panels, or
slots
1 PCIe expansion
card slot(s)
2 Power supply unit
(2)
3 NIC port (4)
4 USB 3.0 (2)
5 VGA port
6 Serial port
7 iDRAC9 Enterprise
port
8 CMA power port
9 Appliance
identification
button
Dell EMC VxRail Appliances on PowerEdge Servers E Series Owner's Manual
Icon Description
N/A The expansion slot(s) enable you to connect PCI
Express expansion cards. For more information on
the expansion cards that are supported on your
appliance, see the
section.
N/A For more information about the PSU
configurations, see the
section.
The NIC ports that are integrated on the network
daughter card (NDC) provide network
connectivity. For more information about the
supported configurations, see the Technical
specifications section.
The USB ports are 9-pin and 3.0-compliant.
These ports enable you to connect USB devices
to the appliance.
Enables you to connect a display device to the
appliance. For more information, see the
Technical Specifications
Enables you to connect a serial device to the
appliance. For more information, see the
Technical Specifications
Enables you to remotely access iDRAC. For more
information, see the iDRAC User's Guide at
Dell.com/idracmanuals.
N/A The Cable Management Arm (CMA) power port
enables you to connect to the CMA.
The Appliance Identification (ID) button is
available on the front and back of the appliances.
Press the button to identify a appliance in a rack
by turning on the appliance ID button. You can
also use the appliance ID button to reset iDRAC
and to access BIOS using the step through mode.
Expansion card guidelines
Technical Specifications
section.
section.
Overview
11