Particulate And Gaseous Contamination Specifications - Dell EMC VxRail E Series Owner's Manual

Vxrail appliances on poweredge servers
Hide thumbs Also See for VxRail E Series:
Table of Contents

Advertisement

Table 24 Maximum vibration specifications
Maximum vibration
Operating
Storage
The table below shows the maximum shock specifications during operations and storage:
Table 25 Maximum shock specifications
Maximum shock
Operating
Storage
The table below shows the maximum altitude specifications during operations and storage.
Table 26 Maximum altitude specifications
Maximum altitude
Operating
Storage
The table below shows the operating temperature de-rating specifications:
Table 27 Operating temperature de-rating specifications
Operating temperature de-rating
Up to 35°C (95°F)
35°C to 40°C (95°F to 104°F)
40°C to 45°C (104°F to 113°F)

Particulate and gaseous contamination specifications

The following table defines the limitations that help avoid any equipment damage or failure from
particulates and gaseous contamination. If the levels of particulates or gaseous pollution exceed
the specified limitations and result in equipment damage or failure, you may need to rectify the
environmental conditions. Re-mediation of environmental conditions is the responsibility of the
customer.
Air filtration specification: Data center air filtration as defined by ISO Class 8 per ISO 14644-1
shpuld have a 95% upper confidence limit. Note: This condition applies only to data center
environments. Air filtration requirements do not apply to IT equipment designed to be used outside
Specifications
0.26 G
rms
orientations).
1.88 G
rms
tested).
Specifications
Six consecutively executed shock pulses in the
positive and negative x, y, and z axes of 6 G for up
to 11 ms.
Six consecutively executed shock pulses in the
positive and negative x, y, and z axes (one pulse on
each side of the appliance) of 71 G for up to 2 ms.
Specifications
3048 m (10,000 ft)
12,000 m (39,370 ft)
Specifications
Maximum temperature is reduced by 1°C/300 m
(1°F/547 ft) above 950 m (3,117 ft).
Maximum temperature is reduced by 1°C/175 m
(1°F/319 ft) above 950 m (3,117 ft).
Maximum temperature is reduced by 1°C/125 m
(1°F/228 ft) above 950 m (3,117 ft).
Dell EMC VxRail Appliances on PowerEdge Servers E Series Owner's Manual
at 5 Hz to 350 Hz (all operation
at 10 Hz to 500 Hz for 15 min (all six sides
Technical specifications
27

Advertisement

Table of Contents
loading

Table of Contents