Dell EMC Unity Series Field Upgrade Procedure page 21

Opening the door or console
Figure 17 Support Table
8. Remove the securing strap by pulling up on the retaining key and pull the
ratchet handle upwards as needed. Refer to
Figure 18 Removing the Straps
1
9. To move the enclosure to the deck or to a shipping pallet, the lift arm must be in
the lower mast position. Refer to
Open the door or console, if one is present.
Adding an optional 80-drive DAE
CL5442
Removing the Straps
2
Using the Portable Lift Below 49 inches
Opening the door or console
CL5430
21