LG MULTI V S ARUB060GSS4 Installation Manual page 4

Hide thumbs Also See for MULTI V S ARUB060GSS4:
Table of Contents

Advertisement

4
tection against noise.
- The inverter equipment, private power genera-
tor, high-frequency medical equipment, or radio
communication equipment may cause the air
conditioner to operate erroneously, or fail to op-
erate. On the other hand, the air conditioner may
affect such equipment by creating noise that dis-
turbs medical treatment or image broadcasting.
• Do not install the product where it is exposed to sea
wind (salt spray) directly.
- It may cause corrosion on the product. Corrosion,
particularly on the condenser and evaporator fins,
could cause product malfunction or inefficient oper-
ation.
Operation
• Do not use the air conditioner in special environ-
ments.
- Oil, steam, sulfuric smoke, etc. can significantly re-
duce the performance of the air conditioner or damage
its parts.
• Do not block the inlet or outlet.
- It may cause failure of appliance or accident.
• Make the connections securely so that the outside
force of the cable may not be applied to the termi-
nals.
- Inadequate connection and fastening may generate
heat and cause a fire.
• Be sure the installation area does not deteriorate
with age.
- If the base collapses, the air conditioner could fall
with it, causing property damage, product failure, or
personal injury.
• Install and insulate the drain hose to ensure that water
is drained away properly based on the installation man-
ual.
- A bad connection may cause water leakage.
• Be very careful about product transportation.
- Only one person should not carry the product if it
weighs more than 20kg(44lbs).
- Some products use PP bands for packaging. Do not
use any PP bands for a means
of transportation. It is dangerous.
- Do not touch the heat exchanger fins. Doing so
may cut your fingers.
- When transporting the outdoor unit, suspending it
at the specified positions on the unit base. Also
support the outdoor unit at four points so that it
cannot slip sideways.
• Safely dispose of the packing materials.
- Packing materials, such as nails and other metal or
wooden parts, may cause stabs or other injuries.
- Tear apart and throw away plastic packaging bags so
that children may not play with them. If children play
with a plastic bag which was not torn apart, they face
the risk of suffocation.
• Turn on the power at least 6 hours before starting
operation.
- Starting operation immediately after turning on the
main power switch can result in severe damage to
internal parts. Keep the power switch turned on
during the operational season.
• Do not touch any of the refrigerant piping during and
after operation.
- It can cause a burn or frostbite.
• Do not operate the air conditioner with the panels or
guards removed.
- Rotating, hot, or high-voltage parts can cause in-
juries.
• Do not directly turn off the main power switch after
stopping operation.
- Wait at least 5 minutes before turning off the main
power switch. Otherwise it may result in water
leakage or other problems.
• Auto-addressing should be done in condition of con-
necting the power of all indoor and outdoour units.
Auto-addressing should also be done in case of chang-
ing the indoor unit PCB.
• Use a firm stool or ladder when cleaning or maintain-
ing the air conditioner.
- Be careful and avoid personal injury.
• Do not insert hands or other objects through the air
inlet or outlet while the air conditioner is plugged in.
- There are sharp and moving parts that could cause
personal injury.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents