Kongsberg cNODE MiniS Information Letter
Procedures for external connections
Hide thumbs
Also See for cNODE MiniS:
- Instruction manual (62 pages) ,
- Quick reference manual (3 pages) ,
- Quick reference manual (2 pages)
Advertisement
Quick Links
Kongsberg cNODE MiniS
Information letter – Procedures for external
connections
Connecting the cNODE battery
charger
It is very important to read the procedures before
connecting the cNODE battery charger to the
cNODE MiniS.
Prerequisites
Note
Always connect the cNODE battery charger to
the cNODE MiniS before connecting the cNODE
battery charger to the mains (110 or 220 Vac).
Context
Procedure
1
Connect the cNODE MiniS to the cNODE
battery charger.
2
Connect the cNODE battery charger to
mains (110 or 220 Vac).
Disconnecting the cNODE battery
charger
It is very important to read the procedures before
disconnecting the cNODE battery charger from
the cNODE MiniS.
Prerequisites
Note
Always disconnect the cNODE battery charger
from the mains (110 or 220 Vac) before
disconnecting the cNODE battery charger from
the cNODE MiniS.
Context
Procedure
1
Disconnect the cNODE battery charger from
mains (110 or 220 Vac).
2
Disconnect the cNODE MiniS from the
cNODE battery charger.
410489 / A / 2016–02–19
Advertisement
Related Manuals for Kongsberg cNODE MiniS
Summary of Contents for Kongsberg cNODE MiniS
- Page 1 Note Always connect the cNODE battery charger to Always disconnect the cNODE battery charger the cNODE MiniS before connecting the cNODE from the mains (110 or 220 Vac) before battery charger to the mains (110 or 220 Vac). disconnecting the cNODE battery charger from the cNODE MiniS.
- Page 2 MiniS from the ROV. Prerequisites Prerequisites Note Note Always connect the cNODE MiniS to the ROV Always turn off the power supply (24 Vdc) before before turning on the power supply (24 Vdc). disconnecting the cNODE MiniS from the ROV. Procedure...