Related Manuals for Kongsberg cNODE MiniS 1.11-50V Ti
Summary of Contents for Kongsberg cNODE MiniS 1.11-50V Ti
- Page 1 MiniS 1.11-50V Ti Transponder Instruction Manual 436538/B September 2022 © Kongsberg Maritime AS...
- Page 2 Kongsberg Maritime disclaims any responsibility for damage or injury caused by improper installation, use or maintenance of the equipment. Disclaimer Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly stated, but does not accept liability for any errors or omissions. Support information If you require maintenance or repair, contact Kongsberg Maritime’s...
-
Page 3: Table Of Contents
MAINTENANCE ..............23 Charging the battery (on-deck) ..................24 ® Lubricating SubConn connectors...................25 Battery charger status and troubleshooting..............25 SPARE PARTS ................ 27 cNODE MiniS 1.11-50V Ti spare part ................28 Battery charger spare part ....................28 Adapter cable spare part....................28 ON/OFF plug spare part....................28 436538/B... - Page 4 TTC 10 spare part ......................29 Test and configuration cable (TTC to MiniS) spare part ..........29 Test and configuration cable (PC to MiniS) spare part ............29 DRAWING FILE..............30 cNODE MiniS 1.11-50V Ti dimensions................31 TECHNICAL SPECIFICATIONS..........32 Performance specifications ....................33 Weights and outline dimensions ..................34 Power requirements ......................34...
-
Page 5: About This Manual
Microsoft Corporation in the United States and other countries. HiPAP ® is a registered trademark of Kongsberg Maritime AS in Norway and other countries. ® cNODE is a registered trademark of Kongsberg Maritime AS in Norway and other countries. -
Page 6: Cnode Minis 1.11-50V Ti
MiniS 1.11-50V Ti Instruction Manual cNODE MiniS 1.11-50V Ti Topics System description, page 7 Naming description, page 7 System units, page 8 Support information, page 9 436538/B... -
Page 7: System Description
MiniS 1.11-50V Ti System description cNODE MiniS 1.11-50V Ti is a family of transponders for underwater positioning and data links, and operates with HiPAP and cPAP transceivers. cNODE MiniS 1.11-50V Ti is designed to be a very versatile system with many interchangeable parts. -
Page 8: System Units
The transponder test and configuration unit is designed for on deck testing and configuration of the transponders. The TTC can test all Kongsberg Transponder low frequency channels, Cymbal and FSK. It can also test telemetry Transponders with internal and external sensors. -
Page 9: Support Information
Should you need technical support for your cNODE MiniS 1.11-50V Ti system you must contact a Kongsberg Maritime office. A list of all our offices is available on our website. You can also contact our main support office in Norway. -
Page 10: General Acoustic Considerations
MiniS 1.11-50V Ti Instruction Manual General acoustic considerations Take this information into consideration when deploying the transponders. Acoustic range The term depth rating should not be confused with the term acoustic range. The acoustic range is dependent on many factors, and some of the factors are outside the control of the user. - Page 11 General acoustic considerations Sound velocity and ray bending Changes in sound velocity through the water column caused by changes in the water temperature and/or salinity can bend the acoustic signal and make it impossible to reach the vessel. 436538/B...
-
Page 12: Getting Started
MiniS 1.11-50V Ti Instruction Manual Getting started Topics Turning on the transponder, page 13 Connecting the transponder to external power and responder signals, page 13 Changing between responder and transponder mode, page 14 Turning on the TTC, page 15... -
Page 13: Turning On The Transponder
Getting started Turning on the transponder The transponder is designed for operation in water only. The transponder may be operated in air for test purposes over a short period of time. Prerequisites The transponder must be charged before use. Procedure Grease the connector with Molykote 44 Medium or equivalent grease. -
Page 14: Changing Between Responder And Transponder Mode
The transponder must be charged before use. By default when the cNODE MiniS 1.11-50V Ti is turned on it is in transponder mode. The signal input for the responder function must be between 2 and 6 ms with a positive pulse of 5 to 24 V. -
Page 15: Turning On The Ttc
Getting started Turning on the TTC Use the Transponder Test and Configuration unit to check that the transponder is ready for use. Procedure Open the suitcase. Turn on the main power switch to start the program. This takes approximately 1.5 minutes. Acoustic test Test the transponder acoustics to make sure it is functioning.. -
Page 16: Pre-Deployment Checks
MiniS 1.11-50V Ti Instruction Manual Pre-deployment checks Before deploying the transponder, it is important to do the following checks to make sure the operation goes smoothly. Context It is recommended to test the transponder with the Test and Configuration unit (TTC) to make sure it is working properly before operation. -
Page 17: Recovering The Transponder
Getting started Recovering the transponder It is important to perform these recovery checks after every operation. Procedure Wash the unit thoroughly in warm fresh water to dissolve any salt deposits and clean off any sand or silt. As an extra precaution, it is recommended that the unit is left to soak in fresh water to allow salt to dissolve and diffuse from hard-to-reach areas, such as crevices between mating parts. -
Page 18: Cable Layout And Interconnections
MiniS 1.11-50V Ti Instruction Manual Cable layout and interconnections Topics Interconnections, page 19 Interconnections for on-deck charging, page 19 Interconnections without external power supply, page 20 Interconnections with external power supply, page 20 Configuration or power connector pinout, page 21... -
Page 19: Interconnections
Cable layout and interconnections Interconnections Interconnections for on-deck charging For on-deck charging, use the cNODE battery charger only. 436538/B... -
Page 20: Interconnections Without External Power Supply
MiniS 1.11-50V Ti Instruction Manual Interconnections without external power supply Interconnections with external power supply 436538/B... -
Page 21: Configuration Or Power Connector Pinout
Cable layout and interconnections Configuration or power connector pinout The external connector is for configuration, responder function, on/off function and charging. This is the pin configuration for a male connector, as seen towards the connector (face view). Pin 1, 2 and 3 is for configuration. Pin 4 and 5 is for responder function. -
Page 22: Operating Procedures
MiniS 1.11-50V Ti Instruction Manual Operating procedures The transponder is operated from the HiPAP operator station APOS. • Refer to APOS online help for descriptions. 436538/B... -
Page 23: Maintenance
Maintenance Maintenance Topics Charging the battery (on-deck), page 24 Lubricating SubConn ® connectors, page 25 Battery charger status and troubleshooting, page 25 436538/B... -
Page 24: Charging The Battery (On-Deck)
Follow the charging procedure carefully. Prerequisites Caution Equalize the temperature of the cNODE MiniS 1.11-50V Ti to between 10 °C and 40 °C before charging it. For on-deck charging, use the cNODE battery charger only. Never charge the battery unattended. -
Page 25: Lubricating Subconn Connectors
• Failure in charger/transponder to mains (110 or 220 Vac). connection If the LED indicator is still • Charger might be faulty flashing red: Charger might be faulty Contact your local Kongsberg Maritime office. 436538/B... - Page 26 MiniS 1.11-50V Ti Instruction Manual LED indicator What it means How to fix this Steady red • The battery temperature • Let the unit warm up or might be outside the charging cool down to an ambient specification temperature of 10 °C to 40 °C before charging.
-
Page 27: Spare Parts
Spare parts Spare parts Topics cNODE MiniS 1.11-50V Ti spare part, page 28 Battery charger spare part, page 28 Adapter cable spare part, page 28 ON/OFF plug spare part, page 28 Interface cable spare part, page 29 TTC 10 spare part, page 29... -
Page 28: Cnode Minis 1.11-50V Ti Spare Part
MiniS 1.11-50V Ti Instruction Manual cNODE MiniS 1.11-50V Ti spare part • : MiniS 1.11-50V Ti Part name • : 436500 Part number Battery charger spare part • : cNODE MiniS 1.11-50V Ti battery Part name charger • : 404199... -
Page 29: Interface Cable Spare Part
Spare parts Interface cable spare part • : Interface cable with locking sleeve Part name • : 424207 Part number TTC 10 spare part • : TTC 10 (Transponder Test and Configuration unit) Part name • : 463018 Part number Test and configuration cable (TTC to MiniS) spare part •... -
Page 30: Drawing File
MiniS 1.11-50V Ti Instruction Manual Drawing file Topics cNODE MiniS 1.11-50V Ti dimensions, page 31 436538/B... -
Page 31: Cnode Minis 1.11-50V Ti Dimensions
Drawing file cNODE MiniS 1.11-50V Ti dimensions 436538/B... -
Page 32: Technical Specifications
MiniS 1.11-50V Ti Instruction Manual Technical specifications Topics Performance specifications, page 33 Weights and outline dimensions, page 34 Power requirements, page 34 Environmental requirements, page 34 436538/B... -
Page 33: Performance Specifications
Technical specifications Performance specifications These performance specifications summarize the main functional and operational characteristics of the system. MiniS 1.11-50V Ti • : 11500 m Depth rating • : 13000 m Operating range • : 12 kHz Operating frequency • : 5 - 25 V positive logic pulse (2 - 6 ms) Responder trigger signal •... -
Page 34: Weights And Outline Dimensions
MiniS 1.11-50V Ti Instruction Manual Weights and outline dimensions These weights and outline dimension characteristics summarize the physical properties of the system. Weight in Model Height Diameter Weight in air water MiniS 1.11-50V Ti 418 mm 194 mm 20 kg... -
Page 35: Battery Safety
Battery safety Battery safety Topics SECTION 1: Identification, page 36 SECTION 2: Hazards identification, page 36 SECTION 3: Composition, page 37 SECTION 4: First aid measures, page 37 SECTION 5: Firefighting measures, page 38 SECTION 6: Accidental release measures, page 38 SECTION 7: Handling and storage, page 39 SECTION 8: Exposure control and personal protection, page 39 SECTION 9: Physical and chemical properties, page 39... -
Page 36: Section 1: Identification
MiniS 1.11-50V Ti Instruction Manual SECTION 1: Identification The specification describes the technical parameters for the battery. The cNODE MiniS 1.11-50V Ti contains a custom made 58 Wh Li-Ion battery. • Product name: cNODE MiniS Battery • Part number: 396782 •... -
Page 37: Section 3: Composition
Battery safety • Internal short circuit — Internal short circuit in a cell. Destruction of the separator can cause a short circuit between the anode and cathode. Thermal runaway and fire is possible. • Water ingress — Internal pressure, thermal runway and chemical reactions may be the consequence. -
Page 38: Section 5: Firefighting Measures
MiniS 1.11-50V Ti Instruction Manual • : The chemicals are eye irritant. Flush immediately with a lot of clear tepid Eye contact water for at least 15 minutes. • : Exposure to the chemicals may cause tissue damage to throat and Ingestion gastro/respiratory tract if swallowed. -
Page 39: Section 7: Handling And Storage
Battery safety dispose of it according to relevant regulations. Scrub the area with detergent and water; collect all contaminated water for proper disposal. SECTION 7: Handling and storage Do not open, disassemble, crush or burn the battery. Do not expose the battery to water, sea water or other high-conductivity liquids. Avoid mechanical or electrical abuse. -
Page 40: Section 10: Stability And Reactivity
MiniS 1.11-50V Ti Instruction Manual For additional information about the cells inside the sealed battery pack, see the safety data sheet provided by the cell manufacturer. Cell manufacturer • : Lithium Werks Manufacturer • https://lithiumwerks.com/ Manufacturer’s website SECTION 10: Stability and reactivity The battery is stable. -
Page 41: Section 14: Transport Information
If the battery is shipped separately, the prevailing national regulations that apply are: UN 3480 PI 965 Section IB, Miscellaneous (Lithium Ion battery). For all shipments – cNODE MiniS 1.11-50V Ti and separate batteries –, use lithium battery handling label as specified in the additional requirement of Section II of packing instructions 965, 966 and 967. -
Page 42: Section 15: Regulatory Information
MiniS 1.11-50V Ti Instruction Manual SECTION 15: Regulatory information Not applicable. SECTION 16: Other information The battery manufacturers’ safety data sheets are available on their websites. • Lithium Werks: https://lithiumwerks.com 436538/B... - Page 43 Index Index 404199 signal pin number ........21 battery charger ........... 28 424207 interface cable ..........29 424208 deployment on/off plug ..........28 description ..........16 424209 description adapter............. 28 battery charger ..........8 deployment ..........16 naming ............. 7 recovery checks ..........
- Page 44 MiniS 1.11-50V Ti Instruction Manual lubricating recovery underwater connector ........25 description ..........17 registered trademarks........5 requirements power ............34 responder maintenance connecting the pigtail to the external power battery charger ........... 25 supply ............ 13 responder mode ..........14 naming description ..........
- Page 45 Index overview ........... 8 purpose ............. 8 Turning on the cNODE MiniS 1.11-50V Ti system............13 underwater connector lubricating..........25 vessel system about ............10 website document downloads ........5 weight technical specifications........34 436538/B...
- Page 46 ©2022 Kongsberg Maritime...
Need help?
Do you have a question about the cNODE MiniS 1.11-50V Ti and is the answer not in the manual?
Questions and answers