Handedness; Wear Inspire 2 In A Clip - Fitbit Zip Inspire 2 User Manual

Handedness

For greater accuracy, you must specify whether you wear Inspire 2 on your
dominant or non-dominant hand. Your dominant hand is the one you use for writing
and eating. To start, the Wrist setting is set to non-dominant. If you wear Inspire 2
on your dominant hand, change the Wrist setting in the Fitbit app:
From the Today tab
> Wrist > Dominant.

Wear Inspire 2 in a clip

Wear Inspire 2 clipped to your clothing. Remove the bands, and place your tracker
in the clip. For more information, see
To put Inspire 2 in the clip:
1. If you previously wore Inspire 2 on your wrist, change your device setting to
On Clip . For more information, see
Note: Make sure Inspire 2 is set to On Wrist
the band.
2. Hold the tracker with the screen facing you. Make sure the time isn't upside
down.
3. Hold the clip accessory with the opening facing you and the clip on the back
facing down.
4. Place the top of the tracker into the clip opening and move the bottom of the
tracker into place. Inspire 2 is secure when all edges of the clip lie flat against
the tracker.
Note that when Inspire 2 is set to On Clip
including heart-rate tracking, automatic exercise tracking, Active Zone Minutes, and
Water Lock .
in the Fitbit app, tap your profile picture > Inspire 2 tile
"Change the band" on page 15.
"Navigate Inspire 2" on
when you wear your tracker in
, certain features are turned off,
page 16.
13