Service; Recycling And Disposal - Nibe UKV 20-40 Installation And Operating Manual

Warnings:
• Never activate circulation of the heating medium
unless the buffer tank is fi lled with the heating
medium.
• Never operate the buffer tank if you fi nd any mal-
function in the safety valve operation.
• Never install any device (such as cut-off and/or
check valves, etc.) between the tank and the safe-
ty valve or open expansion tank (except T-pipes.)
• Any repairs of the buffer tank by the user are for-
bidden.
• Stopping water leaks from the safety valve is not
allowed.
heat
source
Fig. 12 Installation of the UKV 20-40 buffer tank in se-
ries in order to increase the heating system capacity
heat
source
Fig. 13 Installation of the UKV 20-100 buffer tank in
series in order to increase the heating system capacity
Buffer tanks
UKV 20-40, UKV 20-100

4 Service

Report any malfunctions in the buffer tank operation
to the authorized service centres.
CAUTION
The tank may only be repaired / serviced by
an authorized service since improper repair
can cause safety risks, and the loss of pro-
duct warranty.

5 Recycling and disposal

According to the NIBE rules, the products have been
manufactured of high quality materials using the la-
test technologies and solutions that do not endanger
the environment.
When selecting materials, we took into account both
the possibility of reuse of materials (recycling) that
can be disassembled and separated from materials
unsuitable for recycling, as well as risks arising from
the processing of materials not intended to reuse.
The purchased device consists in more than 90 % of
parts that can be recycled and reused, so they are
safe for the environment and human health.
CAUTION
In order to prevent damage to piping systems
and environmental pollution, the product sho-
uld only be disassembled and taken out of
service by appropriately qualifi ed specialists.
CAUTION
At end-of-life, take care that the product and
all the equipment were disposed of in accor-
dance with applicable regulations.
TIP
The packaging, in which the product is deli-
vered, is made mainly of materials suitable
for recycling and utilization. After installa-
tion, you should ensure the proper disposal
of packaging in accordance with applicable
regulations.
Chapter 4 |
Chapter 5 |
Service
Recycling and disposal
9