General; Introduction; Intended Use - Nibe UKV 20-40 Installation And Operating Manual

Buffer tanks
Table of Contents

Advertisement

1 General

Introduction

Thank you for your confi dence and choice of equip-
ment by NIBE. To fully benefi t from the advantages of
this product, please read this Manual before using it,
and in particular chapters relating to the application,
installation and maintenance, and warranty. Please
keep this Manual in a safe place for future reference.
CAUTION
Sections of the Manual relating to the instal-
lation, inspection and maintenance are inten-
ded for the qualifi ed installer.
CAUTION
The manufacturer shall not be held liable for
any damages caused by failure to comply
with the recommendations and observations
contained in this Manual.

Intended Use

Buffer tanks are used for storage and transfer of ener-
gy contained in the heating medium. The main task of
the buffer tanks with capacities of 40 L and 100 L is
to increase capacity of the heating circuit. In addition,
the 100 L tank is a hydraulic coupler is in the heating
system. The accumulated energy is transferred to the
heating system. Buffer tanks can operate with a va-
riety of heat sources in central heating systems such
as heat pumps, solid fuel boilers, solar heating sys-
tems, etc.When used in the system containing a solid
fuel-fi red boiler, the low capacity tank improves the
uniform heat removal. It reduces the amount of fi re
ups and additionally enables the boiler operation at
the design power rating. This also enhances the effi -
ciency and life of the boiler.
When operating with a heat pump, the buffer tank task
is to increase the capacity of the heating system. The
use of buffer limits the number of compressor star-
t-ups, which extends its life. NIBE buffer tanks ena-
ble operation with virtually any type of central heating
system. During the installation and operation, always
follow the instructions in this Manual.
CAUTION
Buffer tanks are designed for heating up and
supplying the heating medium. Any inap-
propriate use, not in compliance with its
intended use is not permitted. Neither ma-
nufacturer nor supplier shall be responsible
for damages resulting from this.
4
Chapter 1 |
General
Fig. 1 UKV 20-40 buffer tank.
Fig. 2 UKV 20-100 buffer tank.
Buffer tanks
UKV 20-40, UKV 20-100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ukv 20-100

Table of Contents