Updating Over Wi-Fi - Ford SYNC 3 Supplement Manual

Hide thumbs Also See for SYNC 3:
Table of Contents

Advertisement

To install the update in your vehicle,
remove anything that is plugged in the
USB ports on the media hub and plug in
the USB drive containing the update.
When the USB drive is plugged in, the
installation should begin immediately. After
a successful installation, the update is
available the next time the vehicle is
started.
When the installation is complete, take the
USB drive back to the computer to report
the update. Log into your owner account
and return to the SYNC software update
page and confirm that you have installed
the update. Insert the USB drive used for
the update into your computer and choose
to report your update. The website
updates your records to reflect your
current software version.

Updating Over Wi-Fi

To update your System over Wi-Fi your
vehicle must be within the range of a Wi-Fi
access point. Data rates may apply.
To connect your system to Wi-Fi, select:
Menu Item
Settings
Wi-Fi
Available
You can then select your
Wi-Fi
Wi-Fi network. You may
Networks
have to enter the security
code if the network is
secured. The system
confirms when it has
connected to the network.
MKC (TME) , enUSA, Edition date: 01/2016, Second Printing
SYNC 3
You must also give the system permission
to update automatically. Upon vehicle
delivery, the System asks you if you would
like to use the automatic update feature.
If you agree to automatic updates, you can
press OK to confirm. If this selection does
not appear upon vehicle delivery you can
access it through the General Settings.
See Settings (page 85). You can also
perform a master reset. See SYNC 3
Troubleshooting (page 100).
If you would like to switch this feature
on later, select:
Settings
General
Automatic
System
Updates
When Wi-Fi and automatic updates are
enabled, your system checks for software
updates periodically. If a new version is
available, it downloads at that time.
Software downloads can take place for up
to 30 minutes after you have switched
your vehicle off. The updates do not
interrupt the normal use of your SYNC 3
system. If a download does not complete
for any reason, the download continues
16
Menu Item
From this menu, you can
enable automatic updates.
If you have not done so
already, the system
prompts you to set up a
Wi-Fi connection when you
enable this feature.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents