Advertisement
Quick Links
OASIS
Ref
Description
A
Expansion tank
B
Fitting JG 3/8 tube x 1/2 BSP
Reducer 3/8 stem – 1/4 tube
C
Tee-piece
D
Tubing, ¼"
E
Bracket, Expansion Tank
F
Screw
G
Cable Tie
H
Solenoid Valve
I
Spout
J
Mesh
K
O-Ring
A
D
C
D
B
B
STAGE 1:
INSTALL EXPANSION TANK
1. Disconnect unit from water and power supply.
2. Disassemble the unit:
a.
Remove 2 x screws at the back of the moulded top
b. Remove moulded top
c.
Disconnect the tube marked on the photo below from the solenoid valves – to disconnect press flange on the pipe
connector.
090805
Technical Bulletin
Kalix – Expansion Tank Installation
Parts List
F
G
E
1 of 4
Part Number
Quantity
034987-001
1 pc
037005-001
1 pc
030552-101
1 pc
029199-003
1 pc
029959-002
1 pc x 4cm
1 pc x 6cm
034988-001
1 pc
026642-023
2 pcs
024070-005
2 pcs
034613-002
1 pc
034625-001
1 pc
034836-001
1 pc
030858-220
1 pc
H
OAS036RevC
I
J
K
OAS036RevC
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Oasis Kalix Series
Summary of Contents for Oasis Kalix Series
- Page 1 OASIS Technical Bulletin OAS036RevC Kalix – Expansion Tank Installation Parts List Description Part Number Quantity Expansion tank 034987-001 1 pc Fitting JG 3/8 tube x 1/2 BSP 037005-001 1 pc Reducer 3/8 stem – 1/4 tube 030552-101 1 pc Tee-piece...
- Page 2 OASIS Technical Bulletin OAS036RevC Kalix – Expansion Tank Installation 3. Assemble expansion tank: Attach fitting and reducer “B” to expansion tank “A”. Connect the two lengths of blue tube to the Tee-piece. Connect the longer length of tubing to the fitting attached to the expansion tank b.
- Page 3 OASIS Technical Bulletin OAS036RevC Kalix – Expansion Tank Installation 4. Install expansion tank: Attach the loose tube on the expansion tank assembly to the fitting in the position marked on the photo b. Attach the expansion tank bracket to the condenser with two screws...
- Page 4 OASIS Technical Bulletin OAS036RevC Kalix – Expansion Tank Installation STAGE 3: REPLACE OUTLET SOLENOID If leaks from spout are still noticeable after the expansion tank has been installed, then the outlet solenoid valve must be exchanged. 1. Disconnect unit from water and power supply 2.
Need help?
Do you have a question about the Kalix Series and is the answer not in the manual?
Questions and answers