Table of Contents
Advertisement
2.2. MOD mode: More custom routes
This section refers to section 5.2.3 "User assignable destinations" (p.37) in the MatrixBrute 2.0 manual
MOD mode provides 16 user-definable mod routes, divided into four banks of four routes
each. Buttons 13-16 are used to access the four banks. Let's start by learning how to assign
a parameter to destinations 13 - 16:
Select the first bank of custom mod routes by pressing button 13 once. Mod routes 13-16 are
now available.
Next, hold the [13, 14, 15, or 16] button while moving the desired knob or slider on the front
panel. The parameter will appear in the OLED display as shown above. You can then assign
a modulation source to this destination and set a modulation amount with the Mod Amount
knob.
Use a similar process to access and edit mod routes 17-20, 21-24, and 25-28:
•
Press button 14 once to access mod routes 17-20
•
Press button 15 once to access mod routes 21-24
•
Press button 16 once to access mod routes 25-28
If you've selected mod routes 17-20, for example, then hold the [13, 14, 15, or 16] button while
moving the desired parameter control to edit mod routes 17, 18, 19, or 20, respectively.
Here's a chart that may help to visualize the button relationships:
Press this once...
Button 13
Button 14
Button 15
Button 16
5
...to access routes...
13-16
17-20
21-24
25-28
Arturia - Changes in version 2.0 - New Features: The Details
Then hold...
...to edit this route
13 / 14 / 15 / 16
13 / 14 / 15 / 16
13 / 14 / 15 / 16
13 / 14 / 15 / 16
25 / 26 / 27 / 28
13 / 14 / 15 / 16
17 / 18 / 19 / 20
21 / 22 / 23 / 24
Advertisement
Table of Contents
