Mcc Settings Mode - Arturia MATRIXBRUTE Manual

2.6. MCC Settings mode


This section refers to section 7.3 "Settings mode" (p.58) in the matrixBrute 2.0 manual
It's quicker to use the MIDI Control Center to change these settings because you can see
them all at once. But you can change them without a computer attached: simply access
Settings mode.
To do this, hold PRESET + SEQ + MOD. The Preset display flashes PAR and the Sequencer
display flashes the word EDIT. After 2 seconds the Matrix buttons will reveal the settings,
which then can be changed using the Matrix buttons.
• The buttons related to the selected parameter are brighter than the others.
• Available values for the selected parameter are lit blue.
• The current value for the selected parameter is purple.
• Available values for all non-selected parameters are a dim blue.
• The current values for all non-selected parameters are a dim purple.
• The parameters in each row are separated by dark buttons, which are inactive.
Here's what the various rows and lit buttons represent, and which MCC parameters they
access:
Row Buttons
A 1-16
B 1-16
C 1-16
D 1-4
6-9
11-14
E 1-2
4-5
7-8
10-11
F 1-2
4-6
G 1-3
5-7
13
Name on Seq screen
Ch.<-
Ch.Lo
Ch.->
Ck.Sr.
Ck.Rt
M.Out
CC.->
CC.<-
14.Bt
Pr.Ch
SQ.->
S.TPo
Pot.M
Velo
Arturia - Changes in version 2.0 - New Features: The Details
MCC parameter
Input MIDI Channel
Lower Part MIDI Channel
Output MIDI Channel
MIDI clock source
Sync Clock In/Out Settings
MIDI out select
MIDI param send
MIDI param receive
14-bit automation
Program Change receive
Sequencer/Arp sends notes
Load Sequence Tempo
Pot mode
Velocity curve
Settings
1-16, Omni, Off [1]
1-16, Off [2]
1-16 [3]
INT, CLK, USB, MIDI
1pps, Korg, 24ppq, 48ppq
Off, MIDI, USB, All
Off, On
Off, On
Off, On
Off, On
Off, On
Yes, If Paused, No
JMP, HK, SCL
LIN, LOG, EXP