Table of Contents
Advertisement
2. NEW FEATURES: THE DETAILS
2.1. Preset mode: Compare presets
This section refers to section 5.1.3 "Preset Compare" (p.35) in the MatrixBrute 2.0 manual
MatrixBrute has 3 memories available when working with a preset:
•
The active preset (i.e., the edit buffer)
•
The physical panel settings
•
The Compare mode memory
Compare mode allows you to view the stored presets while editing the current preset. This
is useful in two ways:
•
To compare the edited state of the preset to the unedited (stored) version, or to
any other preset
•
To preview another preset location before overwriting it with an edited preset.
To enable Compare mode, hold the large Preset button and press a matrix button to select a
preset.
The front panel behaves differently in Compare mode:
•
The Preset button blinks and the SEQ / MOD buttons are dark
•
The Sequencer screen displays COMP
•
The Preset screen displays the number of the previewed preset
•
Select a different preset to preview by pressing its matrix button
•
The blue, flashing matrix button indicates which preset is being previewed
•
You can make temporary changes to the previewed preset, but they can't be
saved...
•
...because the Save button will only save the preset that was edited before
entering Compare mode.
Press Panel or Preset to exit Compare mode. This reloads the previous state of the preset,
including any edits that had been made before entering Compare mode.
♪: You cannot enter Settings mode or LFO Draw mode while in Compare mode.
Arturia - Changes in version 2.0 - New Features: The Details
4
Advertisement
Table of Contents
