Glide In Duo-Split Mode - Arturia MATRIXBRUTE Manual

2.7. Glide in Duo-Split mode


This section refers to section 4.8.1.1 "Glide and Duo-Split mode" (p.23) in the MatrixBrute 2.0 manual
When the MatrixBrute is in Duo-Split mode, Glide can be enabled independently for the
upper and lower sections of the keyboard. (Note that the Glide time is not independent for
the two parts: this value is shared.) Here's how it works.
The Glide on/off button applies to the upper part by default. To toggle Glide for the lower
part, hold the Mode button in the Voice section and press the Glide on/off button. The Glide
button LED shows the glide status of the lower part when the Mode button is held, and shows
the glide status of the upper part when the Mode button is not being held. (Be sure to hold
the button for about a second; holding it for less than 700 ms will toggle the Voice Mode.)
This feature is tons of fun with Duo-Split patches that have sequencer patterns! The lower
part will glide whenever a Slide event happens, as long as Glide has been enabled for the
lower part. But remember: the effect may not be audible if the Glide time is too fast.
15 Arturia - Changes in version 2.0 - New Features: The Details