Arturia MATRIXBRUTE Manual page 17

Row Buttons
9-13
H 1-2
4-5
7-8
I 1-7
J 1-7
K 1-2
4-8
L-O (dark)
P
[1] Hold one button and press another in the same row to select Omni (all pink) or Off (all
blue).
[2] Hold one button and press another in the same row to select Off (all blue).
[3] Use the MIDI Out setting in row D to select Off.
[4] Use the Preset < and > arrows to select intermediate note values.
All parameter descriptions are listed in chapter 7.2. MIDI Control Center settings in the
MatrixBrute 2.0 manual.
Here's how to use the buttons:
The Sequencer < and > arrows cycle through the MCC parameters
•
The Preset < and > arrows edit the value of the selected parameter
•
The Preset display shows the value of the selected parameter
•
The Sequencer display shows the selected parameter
•
• If you know what you want, press the appropriate Matrix button to select the
parameter and set its value.
To exit Settings mode, press one of the three large mode buttons (Preset, SEQ, MOD). These
settings will be saved and recalled when the MatrixBrute is turned off and back on.
Arturia - Changes in version 2.0 - New Features: The Details
Name on Seq screen
P. Sen
Exp.1
Exp.2
Sust
0V.01
0V.02
Glid
PB.DZ
-
LocI
MCC parameter
Pressure Sensitivity
Pedal 1 polarity
Pedal 2 polarity
Footswitch polarity
VCO1 Pitch 0V MIDI Note
VCO2 Pitch 0V MIDI Note
Portamento mode
Pitchwheel Dead Zone
-
Local control
Settings
0, 25, 50, 75, or 100%
STD, REV
STD, REV
STD, REV
C-2, C-1...C3, C4 [4]
C-2, C-1...C3, C4 [4]
Time, Rate
0, 25, 50, 75, or 100%
-
1-2 (On/Off)
14