Table of Contents
Advertisement
No.
2
3
4
IR Receiver
POWER
5
(Power indicator)
6
USB Interface
7
8
9
LCD Screen
1.2 Rear Panel
Refer to Figure 1.2 for the rear panel of DS-8104AHGH(L)I-E4.
Digital Video Recorder Quick Start Guide
Name
Function Description
modes.
It can also be used to tick checkbox fields.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will
advance the video by a single frame.
In Auto-switch mode, it can be used to stop /start auto switch.
Access the main menu interface.
MENU
Switch the channels in PTZ control.
Select/deselect the HDD in HDD management interface.
Exit from the current interface.
ESC
Enter the PTZ control interface in live view mode.
Receiver for IR remote control.
Turn on/off the device.
Power indicator stays red when the device is powered on but is
not turned on.
Power indicator turns pink when the device is being turned on.
Power indicator stays blue when the device has been turned on.
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
Tx/Rx indictor blinks blue when network connection is
Tx/Rx
functioning properly.
HDD indicator blinks red when data is being read from or
HDD
written to HDD normally and stays red when the HDD is
abnormal.
7-inch LCD touch screen to display local menu and live view.
7
Advertisement
Table of Contents
