Table of Contents
Advertisement
click the Add button to add it.
3.9 Live View
Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:
In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the
record and alarm in the channel, so that you can find problems as soon as possible.
Alarm (video loss, video tampering, motion detection and sensor alarm).
Record (manual record, continuous record, event record and command record)
Alarm & Record
In the live view mode, use the mouse to right-click on the window to access the following menu:
Name
Description
Menu
Enter the main menu of the system by right-clicking the mouse.
Switch to the single full screen by choosing channel number from the dropdown list.
Single Screen
Multi-screen
Adjust the screen layout by choosing from the dropdown list.
Previous Screen
Switch to the previous screen.
Switch to the next screen.
Next Screen
Start/Stop
Enable/disable the auto-switch of the screens.
Auto-switch
Auto-switch.
Start Recording
Start all-day continuous recording or motion detection recording for all channels.
A shortcut to enter the IP camera management interface.
Add IP Camera
Playback
Play back the video of the selected channel.
PTZ Control
Enter the PTZ control mode.
Digital Video Recorder Quick Start Guide
Figure 3. 16 Menu
Table 3. 1 Mouse Operation in Live View
The dwell time of the live view configuration must be set before using Start
23
Advertisement
Table of Contents
