6.
Click Apply to finish the ATM settings.
3.11 Recording Settings
Before you start:
Make sure that the disk has already been installed. If not, please install a disk and initialize it. You may refer to the
user manual for detailed information.
Purpose:
You can use the right-click menu in live view mode to configure recording for all channels.
Steps:
1.
In the live view mode, use the mouse to right-click on the window to access the following menu:
2.
Click the Start Recording submenu and select the recording mode to Continuous Record or Motion
Detection Record.
3.
In the pop-up message box, click Yes to finish the quick recording settings for all channels.
Digital Video Recorder Quick Start Guide
Figure 3. 19 Data Package Settings
Figure 3. 20 Start Recording from Right-click Menu
25