RC GROUP TRIPACK Series Installation, Use And Maintenance Manual page 9

Chapter 1 - GENERAL INFORMATION AND SAFETY
During the maintenance stage, wear only the clothing and/or personal
protective equipment indicated in the instructions for use provided by
the manufacturer.
During the normal use or for any job on the machine, keep the
perimetrical space in adequate conditions, so as to prevent any safety
and health hazard to people.
Some stages may require the help of one or more assistants. In these
cases, we recommend that you train and inform them properly on the
type of activity to be carried out, so as to prevent any safety and health
hazard to people.
Handle the machine according to the information provided directly on
the packaging and in the instructions for use delivered by the
manufacturer.
During handling, if necessary, seek the help of one or more assistants
in order to receive adequate signals.
The personnel that loads, unloads and handles the machine must be
adequately qualified, skilled, and experienced in this specific sector and
must be in command of the lifting equipment to be used.
During the installation stage, respect the perimetrical space indicated by
the manufacturer, considering also any other surrounding activity. This
requirement must be met also according to the applicable industrial
safety laws.
The installation and connections must be carried out, as regards the
machine, according to the manufacturer's instructions. The person
responsible for these operations must take into account also all the
applicable regulatory and legislative requirements, ensuring the
workmanlike execution of the installation and connection jobs. Once the
installation is completed and before starting the machine, he must make
sure, through a general check, that these requirements have been met.
If the machine is to be transferred using any means of transportation,
check that these are fit for their intended use and load/ unload the
machine in such a way that there is no hazard to the operator and the
people directly involved.
Before moving the machine using the said means of transportation,
make sure that the machine and its components are anchored to such
means firmly and that their profile does not exceed the maximum fixed
volume.
The operator, apart from being well-informed about the use of the
machine, must be properly qualified and experienced, based on the
type of job to be effected.
RC GROUP S.p.A I_TRP_0909_GB
9