Displaying The Hour-Meter And Maintenance Alarm; Date And Time Setting - RC GROUP TRIPACK Series Installation, Use And Maintenance Manual

6.8 DISPLAYING THE HOUR-METER AND MAINTENANCE ALARM

Hour / pulse meter
UNIT
PUMP 1
PUMP 2
4. Press 7 key to display the mask as shown in the picture.
5. 5 Press 7 keys to run pages in the menu.
6. The alarm "Maintenance" is activated when the running hours of the
7. Press 8 key to move the cursor under (R) letter (Reset).
8. Press 7 key for 6 secs minimum to reset working hours.
9. Press 4 key to go back to the main menu.

6.9 DATE AND TIME SETTING

IMPORTANT
The function can be activated only when clock card "CK" is
installed.
Clock and date setting
time
date
4. Press 7 key to decrease the value; press 6 key to increase the value.
5. Press 8 key to store the value.
RC GROUP S.p.A I_TRP_0909_GB
000000 h R
000000 h R
000000 h R
component reach the set value (Programmable parameters by
Skilled Engineer) and informs the end user about components
maintenance need.
To reset the working hours act as follows:
15:35 Sun
21/01/07
again to change value.
Chapter 6 - INFORMATION FOR USE
1. Press 5 key to access to the main
1/2
control functions menu.
2. Press 7 key to run the menu up to
"HISTORY".
3. Press 8 key to enter menu.
1. Press 5 key to access to the main
control functions menu.
2. Press 7 key up to "CLOCK SET" is
displayed.
3. Press 8 key to menu access. Press
37