Calibration And Tune-Up Information; Calibration And Tune-Up Procedures - RC GROUP TRIPACK Series Installation, Use And Maintenance Manual

Chapter 5 - CALIBRATION AND TUNE-UP INFORMATION
5

CALIBRATION AND TUNE-UP INFORMATION

5.1 CALIBRATION AND TUNE-UP PROCEDURES

Upon the commissioning of the machine, after any failure or
replacement, upon any ordinary or extraordinary maintenance jobs, the
operation checking devices could need a re-calibration or tune-up.
These jobs (the most important are listed below) must be effected by a
specialized Engineer:
– Expansion valve calibration.
– Water flow calibration
– Calibration of the refrigerant circuit parameters.
– Microprocessor calibration.
30
RC GROUP S.p.A I_TRP_0909_GB