Hydraulic Connection To The Plant Heat Exchanger - RC GROUP TRIPACK Series Installation, Use And Maintenance Manual

4.6 HYDRAULIC CONNECTION TO THE PLANT HEAT
The inlet and outlet connection must be carried out as specified during
the design stage.
The water inlet/outlet pipes are identified by the plates directly affixed to
the machine (see figure).

HYDRAULIC CONNECTION TO THE PLANT HEAT EXCHANGER

Anti-vibration connection
Shutoff valve
Calibration valve
Anti-vibration connection
Pressure gauge
RC GROUP S.p.A I_TRP_0909_GB
Chapter 4 - INSTALLATION AND TESTING INFORMATION
EXCHANGER
EVAPORATORE
EVAPORATOR
KÜHLER
ÉVAPORATEUR
OXЛAДИTEЛЬ
INGRESSO ACQUA
WATER INLET
WASSER EINTRITT
ENTRÉE EAU
BХOД BOДЫ
Thermometer
Pressure gauge
Thermometer
EVAPORATORE
EVAPORATOR
KÜHLER
ÉVAPORATEUR
OXЛAДИTEЛЬ
USCITA ACQUA
WATER OUTLET
WASSER AUSTRITT
SORTIE EAU
BЫХOД BOДЫ
Air vent
Pipe's draining valve
Gauze filter
Differential pressure
switch for water flow
Water flow meter
Pipe's draining valve
Air vent
Supply limit
Plant heat
exchanger
21