Enclosed Documentation; Safety Regulations - RC GROUP TRIPACK Series Installation, Use And Maintenance Manual

Chapter 1 - GENERAL INFORMATION AND SAFETY

1.6 ENCLOSED DOCUMENTATION

The following documentation is delivered to the customer together with
the machine:
- Maintenance
maintenance operations. It is preset to record all the jobs effected,
including the extraordinary maintenance jobs.
- Assembly instructions for vibration dampening supports
(optional): describes the procedures for installing them on the
machine.
- Electrical system's diagram: specific for this machine. It is used by
the operators working on the electrical system, in order to identify
the various components and connections.
- Recommended spare parts list: indicates the spare parts that
should be always available.
- Dimensional lay-out: indicates the dimensions of the machine.
- CE Conformity Declaration: the machines are in compliance with
2006/42/CE, 2004/108/CE, CE 97/23, 2006/95/CE norms and
subsequent modifications

1.7 SAFETY REGULATIONS

During the design and production stages, the manufacturer has paid
close attention to all possible sources of safety and health hazard to the
people who interact with the machine. Apart from complying with the
applicable laws, the manufacturer has adopted all the applicable
"workmanlike performance rules". The aim of this information is to make
users aware of the attention necessary for preventing any hazard.
Caution is however mandatory.
Safety is also in the hands of all operators interacting with the machine.
Read the instructions included in the manual and those affixed directly
to the machine carefully; in particular, conform to safety instructions.
The time devoted to reading will prevent any nasty accident; it's always
too late to remind of what should have been done when an event has
already occurred.
The installation of this machine within a plant requires a global project
that takes into account all "workmanlike performance" requirements, as
well as legislative and regulatory principles. Special care must be
devoted to all the technological instructions and information indicated by
the manufacturer.
Do not tamper with, remove, or bypass the safety devices installed on
the machine. Failure to meet this requirement will result in serious
safety and health hazard to people.
The personnel that carries out any type of job during the life of the
machine must be adequately qualified and skilled from a technical
standpoint and must have gained experience in this specific sector.
The lack of these requirements could prejudice the health and safety of
people.
8
handbook: includes the list of scheduled
RC GROUP S.p.A I_TRP_0909_GB