Brocade Communications Systems DCX-4S Backbone Installation Procedure page 8

3. Install the shelf (C in
a. The shelf can be adjusted to a length of between 27 and 31 inches (68.58 and 78.74 cm) to accommodate
your cabinet size. To lengthen or shorten the shelf, loosen the four 6-32 screws in the four slots on the shelf
(I-4 through I-7 in
four 6-32 screws.
b. Secure the shelf to the cabinet with eight 10-32 screws with washers (E in
in each corner of the shelf (see
requirements" on page 7.
FIGURE 3 Shelf installed in cabinet
4. Install the air-duct assembly by inserting it down into the side slot on the shelf. Ensure that the tabs of the duct
align and engage with the slots in the shelf.
8 of 20
Figure 1):
Figure 1 on page 6) and adjust the shelf to the desired length. Once adjusted, tighten the
Figure 3). Tighten screws according to specifications under
Port Side
(Exhaust)
Figure 1 on page 6), two screws
"Torque
Port Exhaust Kit Installation Procedure
Publication Number: 53-1001181-04