Brocade Communications Systems DCX-4S Backbone Installation Procedure page 16

FIGURE 10
Shelf installed in cabinet
Install screws
NOTE
For rails with round holes, use the clip nuts on the front rails for securing 10-32 screws. For rails with square
holes, use the retainer nuts (H and I in
5. Install the air-duct assembly (C in
Ensure that the tabs of the duct align and engage with the slots in the shelf. Also refer to
16 of 20
Port Side
(Exhaust)
Figure 7 on page 13). Also refer to
Figure 7 on page 13) by inserting it down into the side-slot on the shelf.
Install screws
Figure 8 on page 14.
Figure 11
Port Exhaust Kit Installation Procedure
Publication Number: 53-1001181-04
on page 17.