Brocade Communications Systems DCX-4S Backbone Installation Procedure page 11

NOTE
Screws, clip nuts, and retainer nuts to secure the DCX-4S to the cabinet are provided in the DCX-4S hardware
accessory kit.
FIGURE 6
DCX-4S with 27 to 31 in. (68.58 to 78.74 cm) Port-Side Exhaust Kit installed in cabinet
NOTE
For rails with round holes, use the clip nuts (F in
For rails with square holes, use the retainer nuts (G in
6. Install the DCX-4S door and required cable management system using instructions in the corresponding DCX-4S
Backbone Hardware Reference Manual.
Port Exhaust Kit Installation Procedure
Publication Number: 53-1001181-04
Figure 1 on page 6) on the rails for securing the 10-32 screws.
Figure 1 on page 6). Also refer to Figure 2 on page 7.
11 of 20