Chapter Three; Set Up - Operating, Maintenance And Troubleshooting; Set Up; Setting Up Methods And Procedures - Intec ColorCut BC480 User Manual

Chapter Three

Set up - Operating, maintenance and troubleshooting

This chapter details operating methods and any required maintenance of the BC480.

1. Set up

1-1 Setting up methods and procedures

Attention
The BC480 is 15kgs in weight. This can be lifted from its box by one person however, it is advised
that it should be lifted from its box by 2 people.
Remove the BC480 as specified below:
Open the box and remove the top cardboard and foam packing as shown below.
Place you hands either side of the white foam inserts, these should be lifted out with the unit and
remove the unit placing it on a stable surface. Picture 1.
Picture 1 Picture 2 Picture 3
Once out of the box and placed on a stable surface, carefully, and whilst supporting the machine
remove the white foam ends and outer plastic bag. Picture 2 and 3.
Page 10 Page 11