Chapter One; Important Safety Instructions; Safety Precautions; Security Matters - Intec ColorCut BC480 User Manual

Chapter One

Important Safety Instructions

Before installing and using the BC480 please read the following safety insructions. This will help
prevent accidents or loss of equipment and allow you to fully understand the contents and then set
up, operate and maintain the machine in accordance with this.

1 Safety Precautions

1-1 Security matters

In order to prevent accidents, strict compliance with the following matters:
• The machines's power cord ground wire must be grounded
• Do not connect or disconnect with wet hands, as this will cause an electric shock
• Do not use a damaged plug or lead, as this could cause a fire or an electric shock
• Do not use other voltage and power supply, other than specified, as this will cause a fire and
an electric shock.
• Ensure all hair, neckties, necklaces are kept free of the feeding table to avoid injury
• Do not allow children to use this equipment
• Turn off the power when the machine is not in use
Before any action to remove wate media or to troubleshoot the machine and In exceptional
circumstances, please cut off the power supply.
Please contact your supplier for machine operating instructions should you be unable to follow any
of the manuals instructions or if the machine fails to work.

1-2 Warning labels

The warning labels are placed so you are aware of areas where caution should be taken.
1. Caution electric shock - do not touch machine with wet hands and remove before servicing.
2. Caution moving parts - do not place hands in machine whilst in operation.
3. Caution nipping hands - do not place hands in machine.
Operators should pay attention to the location of the warning labels shown here.

2 Safety Features

In order to prevent accidents, the machine has a cover interlock feature to avoid anyone operating
the machine.

2-1 Articles

2-1-1 Articles and operating limits

The machine has a locking safety cover that prevents items from getting caught in the working
mechanism of the machine.
If the cover is removed during operation the machine will stop working.
Page 4

2-1-2 Locking lid - stationary lid

1. Top cover
2. Locked-cover-switch
3. Operate side cover (left cover)
4. Right side cover
5. Front cover
Picture 1-1 front view with feed tray
Picture1-2 back view with catch tray

3 Product Dimensions

540mm
21.25"
250mm
9.84"
840mm
33"
Page 5