Last Card Compensation; Penultimate Cards Compensation; Third From Last Compensation; Subtotal Clear - Intec ColorCut BC480 User Manual

Press or button for Compensation setting -3.0 — +3.0mm
MODE
Press SET button and return to previous menu

8. Last card compensation

Should you need to adjust the cut position of the last card cutting use this option.
Continue to press or button, until the LCD displays:
Press or button for Compensation setting -1.0 — +1.0mm
MODE
SET
Press button and return to previous menu.

9. Penultimate cards compensation

Continue to press or button, until the LCD display:
Page 40
Press or button for Compensation setting -1.0 — +1.0mm
MODE
SET
Press button and return to previous menu.

10. Third from last compensation

Continue to press or button, until the LCD display:
Press or button for compensation setting -1.0 — +1.0mm
MODE
SET
Press button and return to previous menu.

11. Subtotal clear

Continue to press or button, until the Subtotal clear menu shows in the LCD display:
Press the button for a few seconds and release - the accumulated subtotal number will be
cleared to 0.

12. Restore factory settings

Continue to press or button, until the LCD display shows the menu:
Page 41