ADDER X100 User Manual page 8

X100 module switches
Certain aspects of operation can be affected by the switches on the X100
module.
OFF: Normal operation
ON: Flash upgrade
Determines configuration
of hotkeys in conjunction
with switch 
Note: When shipped, all switches are set in the OFF positions and this will
produce normal operation.
Determines configuration
Switch 
of hotkeys in conjunction
OFF: Normal operation.
with switch 
ON: (Before power is applied) Places the X100 module into flash upgrade
Reserved for
mode so that the internal software can be changed. Please see the
future use
upgrade
Switches  and 
Switches 2 and 3 determine which two keyboard keys (when pressed in unison)
are to be designated as 'hotkeys'. Hotkeys signal to the X100 module that the
next key to be pressed is a special configuration command for the module and is
not to be passed to the computer system.
2 OFF
3 OFF
2 OFF
3 ON
2 ON
3 OFF
2 ON
3 ON
Switch 
This switch is reserved for future use.
section in the 'Special configuration' chapter.
Hotkeys = CTRL and SHIFT
Hotkeys = ALT and SHIFT
Hotkeys = CTRL and ALT
Hotkeys disabled
Flash.