Fluke TL2X4W-TWZ Instruction Sheet

2x4-wire ohms tweezers test leads

Download this manual

TL2X4W-TWZ

2x4-Wire Ohms Tweezers Test Leads

Instruction Sheet

Introduction

The Fluke TL2X4W-TWZ 2X4-Wire Tweezers Test Leads are

designed for use with the 8808A, 8845A, and 8846A multimeters.

The split contacts of the test lead's banana plugs are aligned to

mate with the split contacts of the 8808A, 8845A, and 8846A HI

and LO input connectors.

The split contact design of the meters and the test leads bring

both the input and sense terminals of the meters to any 4-wire

resistance measurement with only two, instead of four test leads.

PN 3255292

April 2008

All product names are trademarks of their respective companies.

Page 1 2x4-Wire Ohms Tweezers Test Leads Instruction Sheet Introduction The Fluke TL2X4W-TWZ 2X4-Wire Tweezers Test Leads are designed for use with the 8808A, 8845A, and 8846A multimeters. The split contacts of the test lead’s banana plugs are aligned to mate with the split contacts of the 8808A, 8845A, and 8846A HI and LO input connectors.
Page 2 Do not use the test leads for measurements within Measurement Categories II, III, and IV. • Use the test leads only as specified by Fluke or the protection provided may be impaired. • Do not use the test leads if they are cracked or have exposed metal.
Page 3 Cleaning Cleaning the leads with a soft cloth, mild soap, and water. To avoid damage, do not use abrasives or solvents to clean the leads. Specifications Maximum Voltage between test lead and ground: 33 V rms, 46.7 V peak or 70 V dc Maximum Current: 1 A.
Page 4 How to Contact Fluke To order accessories, receive operating assistance, or get the location of the nearest Fluke distributor or Service Center, call: To contact Fluke, call one of the following telephone numbers: USA: 1-888-99-FLUKE (1-888-993-5853) Canada: 1-800-36-FLUKE (1-800-363-5853) Europe: +31 402-675-200...