Compaq StorageWorks Installation Manual page 22

2–4 Compaq StorageWorks PCI-to-Fibre Channel Host Bus Adapter for IBM AIX Installation Guide
7. Bosboot (regen kernel) by entering the following command:
# bosboot -ad /dev/lpidevice
8. Reboot the system by entering the following command:
# reboot
9. Login as root, enter cd/(enter the driver location) and then enter the following
command:
# installp -acd PC1000.image all
10. Disconnect the fibre cable by removing the cable from the hub or switch.
11. To run cfgmgr enter the following command:
# cfgmgr -v
12. Verify the adapter is installed by entering the following command:
# lsdev -Cc adapter
You should see:
scsi2 Available 20-60 Cambex Fibre Channel I/O Controller
13. Reconnect the fibre channel cable to the hub or switch.
14. To run cfgmgr, enter the following command:
# cfgmgr -v
15. Verify the disks are recognized by entering the following command:
# lsdev -Cc disk
You should see:
hdisk4 Available 10-80-00-5,0 Other SCSI Disk Drive
16. Import volume groups by entering the following command:
smit
Go to System Storage Management, Logical Volume Manager, Volume Groups,
Import a Volume Group, and then select the volume groups that you want to import.
Press the Enter key.