Power Supply Unit Indicator Codes - Dell EMC VxRail P Series Owner's Manual

Overview

Power supply unit indicator codes

VxRail Appliances on 14th Generation PowerEdge P Series, V Series, and S Series Appliance Owner's Manual
16
Table 9 NIC indicator codes (continued)
Status
Link indicator is amber and activity
indicator is blinking green
Link indicator is green and activity
indicator is off
Link indicator is amber and activity
indicator is off
Link indicator is blinking green and
activity is off
AC power supply units (PSUs) have an illuminated translucent handle that serves as
an indicator and DC PSUs have an LED that serves as an indicator. The indicator
shows whether power is present or a power fault has occurred.
Figure 10 AC PSU status indicator
1. AC PSU status indicator/handle
This table describes the AC PSU status indicators and what condition is the PSU when
the power indicator light is green, blinking green, blinking amber, and when it is not lit.
Table 10 AC PSU status indicator codes
Power indicator Condition
codes
Green A valid power source is connected to the PSU and the PSU is operational.
Blinking amber Indicates a problem with the PSU.
Not illuminated Power is not connected to the PSU.
Blinking green When the firmware of the PSU is being updated, the PSU handle blinks
green.
Condition
The NIC is connected to a valid network at less than
its maximum port speed and data is being sent or
received.
The NIC is connected to a valid network at its
maximum port speed and data is not being sent or
received.
The NIC is connected to a valid network at less than
its maximum port speed and data is not being sent
or received.
NIC identify is enabled through the NIC
configuration utility.