Serial Connector; Internal Dual Sd Module; Video Specifications; Environmental Specifications - Dell EMC VxRail P Series Owner's Manual

Serial connector

Internal Dual SD Module

Video specifications

Environmental specifications

The VxRail P Series, V Series, and S Series appliances supports one serial connector
on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE),
16550-compliant.
The VxRail P Series, V Series, and S Series appliances support Internal Dual SD
module (IDSDM). The IDSDM is located at the back of the appliance, in a Dell-
proprietary slot. IDSDM card supports two micro SD cards. Micro SD cards capacity
for IDSDM are 64 GB.
Note
The IDSDM on the VxRail appliances is pre-configured for appliance bare metal
recovery. It is not recommended to change any of the settings.
The VxRail P Series, V Series, and S Series appliances supports integrated Matrox
G200eW3 graphics controller with 16 MB of video frame buffer.
This table describes the supported video resolution options:
Table 21 Supported video resolution options
Resolution
1024 x 768
1280 x 800
1280 x 1024
1360 x 768
1440 x 900
1600 x 900
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
Note
1920 x 1080 and 1920 x 1200 resolutions are only supported in reduced blanking mode.
When the appliance is in continuous operation (for altitude less than 950 m or 3117 ft),
the temperature specification ranges from 10°C to 35°C (50°F to 95°F) with no
direct sunlight on the equipment. When the appliances is not in operation, the
Refresh rate (Hz)
60
60
60
60
60
60
60
60
60
60
Technical specifications
Color depth (bits)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
Serial connector
31