Calibration; Instrument Details; Safelink; Language - Honeywell Impact Series Operating Instructions And Maintenance Manual

4�7�2 Operator
This allows a new operator and/or location to be selected without restarting the
instrument.
4�7�3 Calibration
See Section 4.9 Calibration for full details.
4�7�4 Instrument Details
Several screens are available detailing the instrument set-up, such as alarm levels.
These can be viewed by pressing the s and t buttons to cycle through them. To
access User Menu press 3 while in monitor mode. Scroll down to highlight Instrument
and press 3 again. Some examples are shown below and these are indicative only.
Information shown will vary according to model, country, product application and /
or specific requirements.
Software Revision
Version 2.6
Serial Number
0000000000
Calibration Due
in 34 days
02 %V/V FLM %LEL
23.0
A1
19.0
A2
17.0
A3
Flammable Gas
Methane
25 A1
50 A2
100 A3
50 STEL
25 LTEL
CO ppm
H2S
The following displays indicate whether particular options are fitted and how the
instrument is currently configured.
Pump
Fitted
Data Logging
Gas

Safelink

Fitted
The following additional information is also displayed:
Cartridge SN
0001138
Date of Manufacture
25/Jun/2001
Boot ROM Version
Impact Boot 1.4+
36
This information is also available at switch-on of the
instrument (see Section 3.1 for details).
These are the alarm level settings for oxygen and
flammable sensors. There are no associated STEL or
50
80
LTEL alarms for the two gas channels displayed at the
120
top. h indicates a rising alarm and i indicates a falling
alarm.
50
100
150
This shows the alarm levels for the toxic sensors.
100
50
ppm
Last Calibration
Date of Activation
Impact / Impact Pro / Impact Pro IR Operating Instructions
1 Jan 2001
Autozero
Enabled
Gas Alarms
Latched
Cartridge Type
Standard
Install By
26/Dec/2001
9/Aug/2001
Battery
Rechargeable
Vibrating Alarm
Enabled

Language

English
Honeywell Analytics
Sunrise, FL
800 538 0363