Honeywell Impact Series Operating Instructions And Maintenance Manual page 18

Disengaged
d) To remove the Impact press down on the rear locking catch.
All 4 alarm lights will flash indicating the Impact has started
charging.
3. While charging the instrument, the instrument will flash 2 red LEDs
approximately every 4 seconds. When charging is complete it will light the
green LEDs constantly. A pair of fully discharged battery packs will require
7 hours to recharge fully.
Charging algorithm is based on a timer function so if the charging cycle is
interrupted it will be necessary to leave Impact on Base Station for 7 hours
to produce steady green LED light.
WARNING
Do not charge the battery pack in a hazardous area.
Base Station Link Connection
PSU Connection
Power and Base Station Link Connection Locations
18
Impact / Impact Pro / Impact Pro IR Operating Instructions
Engaged
Data Transfer
Connection