4�8 Datalogging; Installing The Pc Software - Honeywell Impact Series Operating Instructions And Maintenance Manual

4�7�5 Safelink
For Impact Pro instruments the additional menu for Safelink is available. It is used
to initiate communication via Safelink to another Impact Pro instrument.
The Safelink option (where applicable) will not be available in the following
situations.
•
When the internal sample pump is running.
•
When the batteries are low (i.e. there is less than 1 bar on the battery
indication meter).
4�7�6 Language
The Impact is supplied pre-loaded with English, French, German, Italian, Spanish
and Dutch languages, which can be selected using the s, t and 3 keys of the
instrument. In addition one other alternative language can be uploaded to the Impact
(currently available are Portuguese, Danish, Swedish, Norwegian and Finnish) using
the Impact Configuration Utility (ICU) PC software, which is supplied separately.
4�8 Datalogging
There are two types of datalogging. In both cases the information is accessed by
downloading it to a computer using the PC software, which is supplied as part of
the Datalogging Kit. The PC software enables this data to be downloaded, stored,
printed and analyzed. The data can be exported in a format suitable for use with
major spreadsheet software packages. The datalog memory can be automatically
cleared after a successful download – note that this will not change any of the alarm
levels, instrument settings, or calibration gas settings or values of the instrument.
An internal battery will retain the data for 5 years even if the instrument battery is
disconnected or the instrument is switched off. Refer to Section 4.8.1 on how to
install the PC software.
4�8�1 Installing the PC Software
1. Insert the CD into your CD-ROM drive.
2. From the Impact Series ICU Utility Page, click "Install Impact Configuration
Utility".
3. If the CD does not autorun, click Start, then Run. In the Run dialog box,
type d:\Documents\ICU\setup.exe, where d is the letter assigned to your
CD-ROM drive.
4. Click OK, then follow the instructions on your screen.
Impact / Impact Pro / Impact Pro IR Operating Instructions
37