Instrument Labels; Neotronics Equipment Labels; Neotronics Cenelec (Atex) Certification Label - Honeywell Impact Series Operating Instructions And Maintenance Manual

Neotronics Equipment Labels

An explanation of the information on the equipment label is shown below.
Honeywell Analytics Ltd.
Impact Unit Part No. 2302B1000XXX
CAUTION:

Neotronics CENELEC (ATEX) Certification Label

An explanation of the information on the CENELEC (ATEX) certification label is
shown below.
Neotronics Impact Pro non-IR Label:
Explosion Protection Mark
and Equipment Group
Category
Certified Ambient
Temperature Range
EU Explosive Atmosphere
Symbol and Certification Code
as EN50014:1992
DMT Approval
This instrument has been assessed by EXAM (formerly DMT) for performance
of Oxygen, Methane, Propane, Carbon Monoxide, Hydrogen Sulfide and Carbon
Dioxide (electrochemical cell only) channels.
The label marking indicates this: DMT 02 ATEX G 001
The instrument has been tested in accordance to the following European
Standards.
•
EN50 054 & EN50057: 1998 for Combustible Gases (Methane and
Propane).
•
EN50104: 2002 for the measurement of Oxygen.
•
EN45544-1 & EN45544-2: 1999 for the measurement of Carbon Monoxide,
Hydrogen Sulfide and Carbon Dioxide (electrochemical cell only).
•
EN50271: 2000 for the assessment of Digital Components and
Software.
•
MED: Maritime Equipment Directive
Impact / Impact Pro / Impact Pro IR Operating Instructions

Instrument Labels

Comms Connection only to other certified
Impact detectors in hazardous area
Read and understand instruction manual before
operating or servicing
Replace/Recharge batteries only in Non Hazardous area
Refer to Manual for battery types
Product Name
IMPACT GAS DETECTOR
PFG Nr. 41300502
Manufacturers Name and Address
Poole, Dorset
BH17 ORZ, UK
Certification Number
Maritime Equipment Directive
CE Mark - Conforms
to all EC Directives
User Cautions
Australian
Surface Approval
Australian Mines
Approval
Brazilian
Approval
Inmetro Approval
Identification No. of ATEX
Notified Body
11