Collecting Switch Module Logs (For E9000+Mm910/Mm921) - Huawei E9000 Troubleshooting Manual

Huawei Servers
Troubleshooting
4.5 Collecting Switch Module Logs (for E9000+MM910/
MM921)
Using SmartKit
For details about how to use SmartKit to collect logs for the E9000 switch module,
see "Collecting Server Logs" in the
Using FusionDirector
●
●
Step 1 Log in to the FusionDirector WebUI.
For details, see
Step 2 Choose Compute > Hardware > Add Device > Add Online to add the chassis of
the MM920/MM921.
For details, see the
Step 3 Choose Compute > Hardware > Chassis.
The list of chassis managed by FusionDirector is displayed.
Step 4 Click the chassis name.
The Overview tab page is displayed, as shown in
Figure 4-6 Overview tab page of the chassis
Step 5 Click Export Log in the Control Panel area.
The list of installed devices is displayed.
Issue 20 (2020-09-25)
FusionDirector has been installed on the MM920 and can be used to collect
chassis information.
After FusionDirector manages the chassis of the MM921, you can use
FusionDirector to collect information.
8.12 Logging In to the FusionDirector
FusionDirector User Guide .
Copyright © Huawei Technologies Co., Ltd.
FusionServer Tools 2.0 SmartKit User Guide
Figure
4 Collecting Information
WebUI.
4-6.
.
35