Paper Jam In Trays; Clearing Jams; Identifying Jam Locations; Paper Jam In The Front Door - Lexmark B2236dw Quick Reference

2
Select a paper source, and then configure the paper size and
type.
Notes:
For two-sided printing on A4 ‑ size paper, make sure that the
•
paper size setting in the duplex unit is set to A4.
For two-sided printing on letter ‑ , legal ‑ , Oficio ‑ , or folio ‑ size
•
paper, make sure that the paper size setting in the duplex
unit is set to Letter.

Clearing jams

Identifying jam locations

Notes:
•
When Jam Assist is set to On, the printer flushes blank
pages or pages with partial prints after a jammed page has
been cleared. Check your printed output for blank pages.
•
When Jam Recovery is set to On or Auto, the printer reprints
jammed pages.
Jam locations
1 Standard bin
2 Front door
3 Manual feeder
4 Tray
5 Rear door
6 Duplex unit
4

Paper jam in trays

1
Remove the tray.
2
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
3
Insert the tray.

Paper jam in the front door

1
Open the front door.
Warning—Potential Damage: To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of the
printer.