Marquant 820-200 User Instructions page 34

EN
If the LCD shows '0' during parameter setting, press SET (ON/SET) for three seconds to return
to setting mode, where you can set user code, gender, height and age.
2 To start measuring
Make sure your feet are in firm contact with the weighing platform, otherwise body fat cannot
be measured. To ensure accuracy, please remove shoes and socks before stepping onto the scale.
Example: The third user, who is female, 168 cm tall and 28 years old, can perform measurement
as follows:
1. Press SET (ON/SET) to switch on. Show parameters for the last user or default parameters.
2. Press to select user code or reset parameters.
3. Press on the scale. LCD shows '0.0'.
4. Step onto the scale gently.
5. Wait until the digits stabilize.
6. Measuring.
34
Pres SET ON/SET
OFF
1
5
6
7
2
4
8
3