Advertisement
COMPONENT INFORMATION
Freezer Fan Motor - Model 590
1. To access the freezer evaporator fan motor, lift
off the freezer utility rack
2. Remove the top diffuser. Remove front evap-
orator cover held in place with two screws at
the top and two screws at the bottom
2-33).
NOTE:
On Model 590, remember to remove screw
just below water reservoir area before tilting evap-
orator cover forward.
3. Remove two screws, then pull fan motor
assembly out
(Figure
NOTE:
Fan motor wires are held in place by a
clip on the side wall.
4. For reassembly, reverse steps 1 - 3.
NOTE:
After fan motor is installed, make sure fan
blade rotates freely.
(Figure
2-32).
(Figure
2-34).
Models 590
Figure 2-32. Freezer Utility Rack
Models 590
Evaporator Cover
Screws
Figure 2-33. Evaporator Cover
Models 590
Fan Bracket
Freezer Fan Motor
Figure 2-34. Freezer Fan Motor
2-12
Light Diffuser
Ice Bucket
Assy.
Screws
Mounting
Screw
Advertisement
