Philips 2000i Series Quick Start Manual

Mars LE AC2936/2939 DI DACH_EN
Connectivity
You can use the app to control the puri er and check air quality.
Download and install the Philips app
Clean Home+
Open the app and click on "Connect a New Device" or press
the "+" button to connect your device. Please follow the steps
in the app.
Control
Filter status/ Display
Power
reset switch
Hold for IAI
3 seconds to
PM2.5
turn o the
puri er
Display
Auto mode Turbo mode
Wi-Fi Filter cleaning
indicator alert
Indoor allergen PM2.5
index indicator
Allergen index
1-12, 1 indicates
best air quality
Mode Light
switch on/o
Auto
Turbo
Gentle
Sleep
Gentle mode Sleep mode
Filter replacement
alert
3-digit display Air quality
PM2.5 /
light
IAI
Good Fair Poor Very poor
Maintenance
1
2
2 NanoProtect lter Series 3 (FY2180/30)
When display shows
Time to clean the NanoProtect lter Series 3
When display shows
Time to replace the NanoProtect
lter Series 3
Press to check lter lifetime status.
!
Press for 3 seconds to reset after cleaning or replacing lter.
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
90x127mm
3000 048 95951-1