Contents Your air purifier �����������������������������������������������������������������������������2 Product overview ������������������������������������������������������������������������������������������������������� 2 Controls overview ������������������������������������������������������������������������������������������������������ 3 Getting started ������������������������������������������������������������������������������ 3 Installing the filter ������������������������������������������������������������������������������������������������������ 3 Wi-Fi indicator ������������������������������������������������������������������������������������������������������������4 Wi-Fi connection �������������������������������������������������������������������������������������������������������4 Using the air purifier ��������������������������������������������������������������������5 Air quality light ������������������������������������������������������������������������������������������������������������ 5 Turning On and Off ����������������������������������������������������������������������������������������������������6 Changing the mode setting ������������������������������������������������������������������������������������...
Your air purifier Congratulations on your purchase of air cleaner AC2936� To fully benefit from the support that Philips offers, register your product at www�philips�com/welcome� Product overview Air outlet Control panel Particle sensor NanoProtect filter Series 3 (FY2180/30) Back cover...
Controls overview Wi-Fi indicator Mode display: Auto ( Filter cleaning alert Turbo ( Gentle ( ) Filter replacement alert Sleep ( Filter status/ reset button Light on/off button Display switch button Mode switch button Power on/off button Getting started Installing the filter Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter�...
Note: • Corporate/Enterprise networks (e�g� certificates, network profiles) are not supported� We recommend setting up the Philips Air Purifiers on a dedicated network created for IoT devices or WPA2-Personal networks� • Configuration details are provided in the Clean Home+ app (e�g� Mac address) to help set-up on managed networks�...
Using the air purifier Air quality light After approximately 30 seconds, the particle sensor selects the color that corresponds to the surrounding air quality of airborne particles� Note: The color of the air quality light is determined by the highest risk index among PM2�5, IAI and readings� IAI refers to the level of indoor air allergen�...
Turning On and Off Note: • Put the plug of the air purifier in the power socket� • If the purifier stays connected to the electrical outlet after turning OFF, the air purifier will operate under the previous settings when turned ON again� •...
Changing the mode setting You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by touching the button � Turbo mode ( ): The air purifier operates Auto mode ( ): The air purifier automatically on the highest speed� adjusts the fan speed in accordance with the ambient air quality�...
Using the light on/off function You can touch the light on/off button manually to turn off all lights and the control panel� Touch any button to wake up all lights� With the light sensor: • The control panel can automatically turn on, turn off or dim according to the ambient light�...
Checking the filter status • Touch the filter status check/reset button to check the filter service life status� Icon color Display (%) Blue 16-100 Blue-purple 9-15 Purple-red Note: The appliance goes back to normal display if no operations after 3 seconds� 4 Cleaning and maintenance Note: •...
Cleaning the surface of the filter Clean the surface of filter with vacuum cleaner when the filter cleaning alert display on the screen� Pull the Pull the filter Clean the Put the filter Reattach the back cover from the surface of back into the back cover�...
When the filter need to be replaced, the filter replacement alert lights up red� Replace the filter with Philips NanoProtect filter Series 3 (FY2180/30) , Please follow the step of Chapter “Installing the filter”� Touch and hold the filter Wash your hands...
Filter reset You can also replace the filter before filter replacement alert ( ) displays on the screen� After replacing a filter, you need to reset the filter lifetime counter manually� Put the power plug in Within 15 seconds after power Touch the power the power socket�...
Page 15
This is normal� However, if the appliance produces a burnt smell� smell even if removing filters, contact your Philips dealer or an authorized Philips service center� The filter may produce smell after being used for a while because of the absorption of indoor gases�...
Page 16
Problem Possible solution • Perhaps you did not reset the filter lifetime counter� Switch on The appliance still indicates that I need the appliance� Then touch and hold the reset button ( ) for to replace a filter, but 3 seconds� I already did�...