Contents Your.air.purifier.. ������������������������������������������������������������������������������2 Product overview ����������������������������������������������������������������������������������������������������������2 Controls overview ���������������������������������������������������������������������������������������������������������3 Getting started �������������������������������������������������������������������������������3 Installing the filter ���������������������������������������������������������������������������������������������������������3 Wi-Fi indicator ����������������������������������������������������������������������������������������������������������������4 Wi-Fi connection �����������������������������������������������������������������������������������������������������������4 Using.the.air.purifier.. ���������������������������������������������������������������������5 Air quality light ��������������������������������������������������������������������������������������������������������������5 Turning On and Off �������������������������������������������������������������������������������������������������������6 Changing the mode setting ���������������������������������������������������������������������������������������7 Switching the display indicator ���������������������������������������������������������������������������������7 Using the light on/off function ���������������������������������������������������������������������������������8 Setting the child lock ���������������������������������������������������������������������������������������������������8 Checking the filter status ��������������������������������������������������������������������������������������������9...
Your air purifier Congratulations on your purchase of air cleaner AC2936. To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Product overview Air outlet Control panel Particle sensor NanoProtect filter Series 3 (FY2180/30) Back cover...
Controls overview Wi-Fi indicator Mode display: Auto ( Turbo ( Filter cleaning alert Gentle ( Filter replacement alert Sleep ( Filter status/ reset button Light on/off button Display switch button Mode switch button Power on/off button Getting started Installing.the.filter Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter. Pull the back cover and remove it from the appliance.
Note: • Corporate/Enterprise networks (e.g. certificates, network profiles) are not supported. We recommend setting up the Philips Air Purifiers on a dedicated network created for IoT devices or WPA2-Personal networks� • Configuration details are provided in the Air+ app (e.g. Mac address) to help set-up on managed networks�...
Using the air purifier Air quality light After approximately 30 seconds, the particle sensor selects the color that corresponds to the surrounding air quality of airborne particles. Note: The color of the air quality light is determined by the highest risk index among PM2.5, IAI and readings�...
Turning.On.and.Off Note: • Put the plug of the air purifier in the power socket. • If the purifier stays connected to the electrical outlet after turning OFF, the air purifier will operate under the previous settings when turned ON again� »...
Changing the mode setting You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by touching the button� Turbo mode ( ): The air purifier operates on Auto mode ( ): The air purifier automatically the highest speed� adjusts the fan speed in accordance with the ambient air quality�...
Using.the.light.on/off.function You can touch the light on/off button manually to turn off all lights and the control panel. Touch any button to wake up all lights� With the light sensor: • The control panel can automatically turn on, turn off or dim according to the ambient light. •...
Checking.the.filter.status Touch the filter status check/reset button to check the filter service life status� • Icon color Display (%) Blue 16-100 Blue-purple 9-15 Purple-red Note: The appliance goes back to normal display if no operations after 3 seconds. Cleaning and maintenance Note: Do not attempt to clean the particle sensor with a vacuum cleaner�...
Cleaning.the.surface.of.the.filter Clean the surface of filter with vacuum cleaner when the filter cleaning alert display on the screen� Pull the back Pull the filter Clean the Put the filter Reattach the cover and from the surface of back into the back cover�...
Do not smell the filter as it has collected pollutants from the air. When the filter need to be replaced, the filter replacement alert lights up red� Replace the filter with Philips NanoProtect filter Series 3 (FY2180/30) , Please follow the step of Chapter “Installing the filter”. Touch and hold the filter...
Filter reset You can also replace the filter before filter replacement alert ( ) displays on the screen. After replacing a filter, you need to reset the filter lifetime counter manually. Put the power plug in Within 15 seconds after power Touch the power button the power socket�...
Page 15
This is normal. However, if the appliance produces a burnt smell even if removing filters, contact your Philips dealer or an authorized Philips service center. The filter may produce smell after being used for a while because of the absorption of indoor gases. It’s recommended that you reactivate the filter by putting it in direct sunlight for repeated use.
Page 16
Problem Possible solution • If the router your purifier is connected to is dual – band and currently it is not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair your purifier again. 5GHz networks are not supported.